Supports VS1005 and VS1205 devices, equipped with VS1205G device
Contains essential electronics on-board, pin headers for external connections.
Supported by VSIDE development tools
Description
The VS1005 Breakout Board is a simple module for quick prototyping and application development. See also VS1005 Breakout Board page.
The board is powered from the USB bus. Serial port is used as a debugger interface and for loading code to VS1005. See the accessories section for VSIDE USB UART cable.
Quantity
Bulk price
at least 1 piece(s)
40.00 € * / per unit measurement
at least 2 piece(s)
35.00 € * / per unit measurement
at least 10 piece(s)
31.00 € * / per unit measurement
*
Product prices are displayed without VAT. If VAT applies to your order, it will be added after country selection.
Speaker development board with the VS1005 integrated circuit and a class D amplifier.
Features
8 LEDs and 4 buttons for user interface
Analog XLR input and stereo RCA input with firmware-controllable voltage range select (input gain)
Amplifier output for speakers or speaker elements (2x40W to 8Ohm load, 2x70W to 4Ohm load, bridged mode possible 1x135W to 2Ohm load)
Coaxial digital input and output
USB connection for firmware update and/or parameter adjustments
microSD socket for audio data, updates, data exchange, etc.
Supply Voltage from 7V to 26V (dc)
Mounting holes, Solder points for additional interfaces and peripherals, such as IR receiver, microphone, UART, I2S, FM radio antenna
Supports VS1005, VS1205 and VS8005 devices
Open source VSOS kernel and device drivers, and example firmware
Supported by VSIDE development tools
Included
VS1005 Amp Board
VSIDE USB UART Cable
MicroSD card
Note 1: The shipment does not include power supply. We recommend standard isolated laptop DC power supply, such as 12V/2A or 20V/90W.
Note 2: The board has small heat sink that should be enough for 2x40W. Please change heat sink to bigger when using higher power levels.
Description
Vs1005 Amp Board is an application development board for VS1005. It features a class D amplifier for direct connection to speakers or speaker elements. The board has connectors for analog and digital inputs as well as speaker outputs. The board also features two columns of LEDs and buttons for user interface.
Possible applications
Active speaker with crossover implemented by the firmware for two speaker elements.